Need help with a stripped-out threaded hole

Social Media

TOPIC: Need help with a stripped-out threaded hole

Re:Need help with a stripped-out threaded hole 15 years, 10 months ago #1466

joepaluch OFFLINE Moderator Posts: 1483	Yeah good to hear. Do make sure you mark the bolt head and check that sucker a few times between sessions. Just incase it wants too loosen up. There is a chance that the threads are a bit loose and the bolt may not stay tight. No big deal if you look at it. I figure if it lasts a weekend it will hold for good.
	Joe Paluch 944 Spec #94 Gina Marie Paper Designs Arizona Regional 944 Spec Director, National Rules Coordinator 2006 Az Champion - 944 Spec Racer Since 2002 Reply Quote

Re:Need help with a stripped-out threaded hole 15 years, 10 months ago #1469

GaryM05
OFFLINE
Senior Racer
Posts: 100

joepaluch wrote:

Yeah good to hear.
Do make sure you mark the bolt head and check that sucker a few times between sessions. Just incase it wants too loosen up. There is a chance that the threads are a bit loose and the bolt may not stay tight. No big deal if you look at it. I figure if it lasts a weekend it will hold for good.

Yep - good point. I'll be adding a step to the post-session checklist for the Miller weekend to check that bolt and see how it holds up.

Snyder Motorsports #10 944 Spec

Last Edit: 15 years, 10 months ago by GaryM05.

Reply Quote

Reply Topic

New Topic

Page:
1
2

944-SPEC

Racing Discussion

Race Car Build

Moderators: joepaluch, tcomeau, KLR

Time to create page: 0.07 seconds

Social Media

Sponsors

TOPIC: Need help with a stripped-out threaded hole

Re:Need help with a stripped-out threaded hole 15 years, 10 months ago #1466

Re:Need help with a stripped-out threaded hole 15 years, 10 months ago #1469