Social Media


Error
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
Welcome, Guest
Username Password: Remember me

Autopower Roll Cage on a Texas Build
(0 viewing) 

TOPIC: Autopower Roll Cage on a Texas Build

Re: Autopower Roll Cage on a Texas Build 7 years, 2 months ago #14706

  • Tabbasco
  • OFFLINE
  • Junior Racer
  • Posts: 61
Post pics of the problem
v/r
T2
HPDE Driving Instructor
www.thedriversedge.net

Re: Autopower Roll Cage on a Texas Build 7 years, 2 months ago #14707

  • ikazuchi
  • OFFLINE
  • Comp School
  • Posts: 20
You can see how the angle of the bar coming in is off from the "post" off the A pillar. If I were to let the bar sit "naturally," it would be above the post it joins to. The angle is bad enough that I can't get the coupling to move into place and bolt it down. The lower bar on this side (and both on the other side) went in without any trouble.
Attachments:

Re: Autopower Roll Cage on a Texas Build 7 years, 2 months ago #14708

  • ikazuchi
  • OFFLINE
  • Comp School
  • Posts: 20
Sorry that the photo is upside down. Stupid iPhone is having trouble figure out which way is up.

Re: Autopower Roll Cage on a Texas Build 7 years, 2 months ago #14715

  • Tabbasco
  • OFFLINE
  • Junior Racer
  • Posts: 61
This is why I internally sleeved the cage and it took me having to keep the entire cage loose until I pushed it all together...it took hours to use rubber mallets to make it all come together.

Plus someone added a door bar to your cage which makes it even harder to get back together...
v/r
T2
HPDE Driving Instructor
www.thedriversedge.net
Last Edit: 7 years, 2 months ago by Tabbasco. Reason: more info
Moderators: joepaluch, tcomeau, KLR
Banner
Time to create page: 0.34 seconds