Does anyone know the dimensions of the stock undertray? My car came without one, so I'm thinking I'll just make my own, but I don't know how big to make it (or not make it).

Thanks

Early or late ? I have an early off the car right now and can measure but basically it coes frame rail to frame rail and Rad support to back edge of cross member

JerryW wrote:


It's an early car. Thanks, it sounds like that's what I needed to know. Does it go between just the inner edges of the frame rails, or is it a little wider than that?

Todd also wanted to make one...

I have one for the #913 you can use to make yours.

Weston wrote:


Outside of frame rails. There is a threaded hole up close to the sway bar to bolt into but you may want to skip that part if you are making your own. Three bols at the radiator and three on the crossmember. Mine has louvers cut and bent into it.