Social Media


Welcome, Guest
Username Password: Remember me

944 SPEC BUILD
(1 viewing) (1) Guest

TOPIC: 944 SPEC BUILD

Re: 944 SPEC BUILD 7 years, 6 months ago #15378

IMG_2060.jpg


IMG_2061.jpg


IMG_2063.JPG


IMG_2068.JPG


IMG_2070.JPG
Zeca Pires
Miami FL

Re: 944 SPEC BUILD 7 years, 6 months ago #15382

The cage looks good. My only concern is you diagonal across the main hoop. The bars should be almost touching.
NASA CCR- 15.6.14.B Tube / Mounting Plate Specifications
Any number of tubes may attach to a plate so long as they are touching each other at the plate. There may be
a small gap between tubes to allow welding 360 degrees around each tube. If there is no gap between the
tubes, they must be welded around the base as much as possible to form a single figure-eight weld, AND the
tubes must be welded to each other for two (2) inches up from the base plate.
Moderators: joepaluch, tcomeau, KLR
Banner
Time to create page: 0.28 seconds