Social Media


Error
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
  • Kunena Internal Error: Please contact the site administrator to fix this issue!
Welcome, Guest
Username Password: Remember me

AC hose removal
(0 viewing) 
  • Page:
  • 1

TOPIC: AC hose removal

AC hose removal 6 years, 7 months ago #16101

  • dustinh
  • OFFLINE
  • Drivers Ed
  • Posts: 11
Hey all,
I pulled all the ac / heater stuff from under my dash this weekend. That left 2 ac hoses coming into the cabin. I haven't pulled the ac from the car yet, but it looks like removing those metal lines is going to be difficult/impossible with the engine in the car. Is it fine just to leave them in there? Wasn't sure if I could cut them or if I should just leave them for now. Thoughts?

Thanks,
Dustin

Re: AC hose removal 6 years, 7 months ago #16102

  • cbuzzetti
  • OFFLINE
  • Endurance Racer
  • 944 Spec = The best racing on the planet
  • Posts: 1190
As long as the system is discharged then take a sawsall to them or whatever works to remove them.
2018 NASA 944Spec National Champ
2018 NASA ST5 P2 944 Nationals COTA
2017 NASA 944Spec WSC P3
2016 NASA PTD-944 WSC P2
2015 NASA GTS1 Western Champion
2014 NASA 944Spec Western Champion
2013 NASA 944Spec So-Cal Regional Champion
2013 NASA 944Spec National P3
2010 NASA GTS-1 National Champion
2010 NASA 944Spec National P3
2010 NASA So-Cal 944Spec Regional Champion
2009 NASA 944Spec National Champion

Re: AC hose removal 6 years, 6 months ago #16201

It is going to be very hard to remove the lines with the engine on the vehicle. I would leave the lines there and will remove it when you've the engine removed. They don't weight all that much.
Zeca Pires
Miami FL
  • Page:
  • 1
Moderators: joepaluch, tcomeau, KLR
Banner
Time to create page: 0.30 seconds