Social Media


Welcome, Guest
Username Password: Remember me

Fuel line failures and the Fuel pressure damper
(1 viewing) (1) Guest
  • Page:
  • 1
  • 2

TOPIC: Fuel line failures and the Fuel pressure damper

Re: Fuel line failures and the Fuel pressure damper 10 years, 4 months ago #17837

Great thread on replacing all of these lines here for ~ $85:
DIY fuel line replacement
Eric Kuhns

National Director Emeritus

2007, & 2008 National Champion
2011, 2012 2nd
Last Edit: 10 years, 4 months ago by Sterling Doc.

Re: Fuel line failures and the Fuel pressure damper 10 years, 4 months ago #17838

  • joeblow
  • OFFLINE
  • Seasoned Racer
  • Old Racer
  • Posts: 226
Yep that is basically what I have now but I have a compression fitting on the FPR as well, no clamp.

I chose to run AN stainless braided hose for the added abrasion protection but push lock hose, cloth braided and high quality rubber can all be run as well.

Truth be told that if I was buying hose I would have likely gone with cloth braided hose to save some weight but I have lots of Stainless AN lying around.
Old Racer!

Re: Fuel line failures and the Fuel pressure damper 10 years, 4 months ago #17841

As the rules are written now, it is pretty clear that only the rubber lines can be replaced. This is something that we can consider in the rule change request period. I see this as two separate parts - replacing the lines, and removing the fuel damper.

For this year, I'd talk to your local series director about this.
Eric Kuhns

National Director Emeritus

2007, & 2008 National Champion
2011, 2012 2nd
  • Page:
  • 1
  • 2
Moderators: joepaluch, tcomeau, KLR
Banner
Time to create page: 0.07 seconds