Social Media


Welcome, Guest
Username Password: Remember me

My 944-SPEC Build
(1 viewing) (1) Guest

TOPIC: My 944-SPEC Build

My 944-SPEC Build 15 years, 12 months ago #2841

Actually, the car is already built, but I have a few things to change to bring it under 944-SPEC rules.

First up,a great deal on eBay for a stock header to replace my MSDS Header:

cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll...X%3AIT&viewitem=

Once I get my Bilstein Escort Cup stuff sold, I will invest in my Koni's

Then, all that is left are the Torsion Bars and a fresh set of R888 for '09

Here is my car for those interested:



Oh, I will have a new Blue paint scheme too.
MICHAEL MADUSKE
2009,2010 Southeast 944-SPEC Champion

Re:My 944-SPEC Build 15 years, 12 months ago #2843

Looks nice, and you should come out money ahead, at least on the suspension!
Eric Kuhns

National Director Emeritus

2007, & 2008 National Champion
2011, 2012 2nd

Re:My 944-SPEC Build 15 years, 12 months ago #2844

Hope so, just gotta find some 30mm T-Bars.
MICHAEL MADUSKE
2009,2010 Southeast 944-SPEC Champion

Re:My 944-SPEC Build 15 years, 12 months ago #2854

Looks good!

Joe Paluch
944 Spec #94 Gina Marie Paper Designs
Arizona Regional 944 Spec Director, National Rules Coordinator
2006 Az Champion - 944 Spec Racer Since 2002

Re:My 944-SPEC Build 15 years, 11 months ago #3051

I got my Koni's today, 30mm torsion bars too. Installed the inserts up front, no problems there. Can't install them yet until I get the correct Upper Spring Perches. I accidentally sold my Ground-Control ones with the Bilstein's.
MICHAEL MADUSKE
2009,2010 Southeast 944-SPEC Champion

Re:My 944-SPEC Build 15 years, 11 months ago #3056

MICHAEL MADUSKE
2009,2010 Southeast 944-SPEC Champion
Last Edit: 15 years, 11 months ago by mcmmotorsports.
Moderators: joepaluch, tcomeau, KLR
Banner
Time to create page: 0.09 seconds