Social Media


Welcome, Guest
Username Password: Remember me

Texas area racing/machine shops
(1 viewing) (1) Guest
  • Page:
  • 1
  • 2

TOPIC: Texas area racing/machine shops

Texas area racing/machine shops 13 years, 7 months ago #10671

  • cgktexas
  • OFFLINE
  • Senior Racer
  • Posts: 155
What shops, especially machine shops, are folks using (or would recommend) in the Texas area for work on their 944 Spec?

Who has had their cranks cross drilled and who did the work?
Getting ready to get the two heads surfaced and would like to get #2 and #3 cross drilled on the two cranks I have.
Curt King
Flying Penguin Racing
an OtterHouseProduction (www.otterhouseproductions.com)
Rockwall, TX
#14 1987 944 Spec - in work (and getting closer)
For His Glory Ministry
Lake Pointe Church
Upper Room Dallas
TJT
Autism Speaks

Re: Texas area racing/machine shops 13 years, 7 months ago #10743

I sub my head work out to Automotive Machine and Supply in Ft. Worth. That's a ways from Rockwall, but I usually make a run over there once a week. I'd be happy to drop your heads off if you'd prefer to drop the heads off at my shop in Dallas.

I can also get your crank taken care of. Oh and don't forget to tap those heads for a steam vent.

Anything you need, my shop Clown Shoe Motorsports, would be happy to help. Our normal rates are $85/hr, but we are doing work for Spec Racers at $50/hr We've worked on almost every 944 Spec car in Texas, and I have been running a 944 Spec car since 2008. We know these cars well!

-bj

Re: Texas area racing/machine shops 13 years, 7 months ago #10783

I can vouch for BJ - he's a great asset to have in Texas!
Eric Kuhns

National Director Emeritus

2007, & 2008 National Champion
2011, 2012 2nd

Re: Texas area racing/machine shops 13 years, 7 months ago #10787

  • B1BFlyer
  • OFFLINE
  • Senior Racer
  • Posts: 111
Ditto, he's had his hands in or is currently working on 2/3 of the Texas 944 cars!

Hurry up and get the car running Curt!
Ryan Peterson
Abilene, TX
924s, #21

Oversteer scares passengers, understeer scares drivers.

Re: Texas area racing/machine shops 13 years, 7 months ago #10789

Sterling Doc wrote:
I can vouch for BJ - he's a great asset to have in Texas!


B1BFlyer wrote:
Ditto, he's had his hands in or is currently working on 2/3 of the Texas 944 cars!


5 out of 7 of the cars currently competing in TX. Thanks for the props guys!

-bj

Re: Texas area racing/machine shops 11 years, 11 months ago #14928

What do you normally charge for cross drilling a crank?
  • Page:
  • 1
  • 2
Moderators: Timwold
Banner
Time to create page: 0.09 seconds